You may recognize this penguin as Gunter from the animated tv show Adventure Time. I made this tiny knitted fellow using this Adventure Time Gunter Pattern.
I made him for my friend Scott‘s birthday. It was my first time knitting a stuffed animal, and it was a lot easier than I thought it would be, even though I don’t own double point needles and had to make him on regular needles.
Since I worked him on normal needles, I had to sew up a lot of seams. Luckily, the seams are almost impossible to see on the finished plushy.
I also modified the pattern slightly when I made the feet, and added one row on each toe on accident. I think it worked out fine, and made his toes more distinguishable from each other.
Over all, the pattern was surprisingly easy to knit, and I really like the result. Thanks for reading!
I made this hood using the Bobble Hood with Tassels pattern.
It was easy and straightforward to make,but I did have a little trouble with the borders. I somehow messed up the back post single crochet so that it was on the wrong side of the piece, and had to match that when I made the second portion of the edging stitch.
Looking back at the pattern, my hood appears to be a bit smaller than the original, and the bobbles are in slightly different places. I’m not entirely sure what I did to cause this.
I am happy with the hood I ended up with, but I’m not sure it was the one that I was trying to make. I’ve received a lot of compliments on it, and might make another one. Next time I’ll pay closer attention to the pattern to figure out what I did wrong.
I started working on this sweater exactly two weeks ago, and I’m really proud of how much I’ve made so far, even if I’m not finished. Eventually, the sweater should be a replica of the Hamburger and Fries sweater that Mabel Pines wears in the television show Gravity Falls.
I used the Laura Sweater pattern and also drew inspiration from this version of the sweater. (The second link is only visible to those with a Ravelry account.) I made the collar 9″ instead of 12″. I added six rows to the raglan part of the sweater in order to make the armholes fit my arms better.
In the pattern, the body of the sweater is 12″ long before the bottom ribbing is worked, but I made mine about 16″ long.
I’m only about halfway done with one sleeve and it’s a little tight, but still wearable. If I were to make this sweater again, I would modify it so that the sleeves would start out wider. The torso of the sweater fits perfectly, except for the very bottom edge where I cast off. I used the slip slip knit method, thinking that it would be super stretchy, but it is not. I might go back and redo my cast off row if I can find a stretchier cast off.
If anyone has any super stretchy cast off methods, please share them with me!
I’ve been doing a lot of projects with time restraints and projects for people, and I decided to take a break from that and make something for fun!
I made knit this hat from a pink yarn so bright it looks like it’s glowing. It was super difficult to photograph and I apologize for the grainy photos. I made up the pattern as I went along, and although it isn’t perfect, I can type up a version of the pattern if anyone wants to make this hat. Let me know if you’re interested!
Make sure to check out my facebook page if you haven’t already!
My friend’s friend Vicki asked me to make her a hat that said ‘Grandpa Vicki’ on it. I made this one the same way that I make all of the knitted slouchy beanies, but with the addition of a simple pom-pom. If anyone is interested in the basic ideas behind it, I can make a post about them.
I designed these letters the same way as I did the ‘ANGEL’ hat, using this knitting graph stitch template. I also used the same method to write the letters, and remembered to take a picture of the inside this time!
If you haven’t liked my facebook page yet, you should! I’ve been writing about the cosplays I did for Bournemouth, and I will be posting about my costumes in detail next week!
I made this hat using the All Grown Up Striped Slouched Hat pattern. The pattern calls for the hat to be made using an aran yarn, but I used a double knit (a double knit is thinner than an aran). In order to be able to make the hat to fit my head, I only needed to change the length off the hat. I used a 5.5 mm (I) crochet hook and made the small adult size. I crocheted about 6 more rows in the stripe pattern than the pattern asked for.
The pattern was fairly easy to make, and I learned a new stitch as well as the best method (in my opinion) of making a brim. The pattern calls for the brim to be simultaneously made and attached to the hat, thus eliminating the hassle of sizing the brim to the hat and attaching it. I will definitely be using this brim method for all of my future crochet hats!
Why yes, that is a Kylo Ren mask! I made this combination hood and scarf using this scoodie pattern. From my calculations, I thought the scoodie would take about two balls of yarn to make, but it ended up taking six.
It’s difficult to photograph without it looking faded or without all of the detail disappearing, but I hope these photos give an idea of what it looks like. The pattern was a video pattern, which I personally do not like as much as a written pattern, but the scoodie was very easy to make. I would definitely suggest this pattern to people learning to crochet, because of its simple design with great visuals in the instructional video. It worked up very quickly because of the thickness of the yarn, and the scoodie is very warm – perfect for cold days!
I made this hat for my friend Nicole, who told me to make her a hat that “has a random word on it that you think describes me”. Of course I went with ‘★ANGLE★’, a reference to my friend being an angel, and to an image that went around ages ago that said “I can be your devil or angle” on it. All of the pictures of the hat (with Nicole in it) were taken by Nicole. I tried to use a couple websites I found through google that translate images to knitting patterns, but I found it difficult to get the patterns to look how i wanted it to. Instead, I printed out a knitting pattern template, which is basically a grid of rectangles roughly the same size and shape of stitches, and drew out the letters and stars on that. The knitting method I used for the lettering is called stranded knitting technique, and involves ‘floats’ of yarn to be left on the back of the work. My tension for these floats were off in the space behind the stars, which resulted in them puffing out quite a bit. My tension in the lettering, however, is much better, and that section is very flat. I think I just need more practice in order to fix my tension issues. Overall, I do like the hat a lot, and I think it’s perfect for Nicole.
Since my visa doesn’t allow me to do freelance work and I’ve been making hats like it’s what’s keeping me alive, I’ve been trading hats with my friends for different things. I believe I’ve mentioned this before, when I talked about my Ugly Hat Trade with my friend Katie.
My friend Scott, who takes the same course at uni with me, requested that I make him a ‘cat beanie’ in trade for a drawing, so I present you with the Witch’s Cat Hat. The hat is a simple knit base with a half inch of rib stitch at the brim. The ears are two identical crocheted triangles which were then crocheted together using black yarn.
This hat was traded with my friend Luc for food. It was made using the Hella Gay Hat pattern, which I lengthened to make a beanie. I made the larger size, and it ended up being too big. I tried a new technique on this hat, double knitting, which causes the design to be knit on both sides of the piece at the same time, just in opposite colors. It was a little difficult to start out, but easy to pick up. This method takes a lot longer than just creating ‘floats’ in the back of the work, but the tension is much better. Since there is essentially two layers of work, this makes the hat warmer and squisher, which is nice, but since I only double knit a small portion of the hat, it ends up looking a bit odd when placed on the head.
I am very happy with the pom pom.
All of these scarves were made over the summer before I moved for some of my relatives.
This cowl was knitted using the Infinity Trinity Cowl and Wristers pattern. I only made the cowl. It was an easy pattern to do, and an easy pattern to memorize, which made it nice to work on while watching TV. The only thing I’m not happy with is the seam joining the ends together. It’s a solid seam that won’t tear apart, but it’s very obvious.
This is based off the Broomstick Lace Infinity Scarf, but I lengthened the pattern so that it is instead a regular scarf. Another super easy pattern good for doing in front of the TV, although holding a huge knitting needle and trying to crochet around it at the same time takes a little focus.
This crocheted cowl has Abstract Crochet Cats and pom-poms! What’s not to like? This design was fairly easy to make, and my mom convinced me to add the pom-poms as a fun addition. I discovered that to make the cats look more like cats, the stitches done ‘in between the ears’ should be done AROUND the stitch instead of through it.
Can you see the cats?
These are the two hats I knitted for my friend Ruth for Christmas. She asked for a Where’s Waldo Hat, and I messed up the first hat, which is the one on the left. It is clearly not a Where’s Waldo hat, and is instead a Santa hat. I realized my mistake too late, and so finished the Santa hat before moving on to the Where’s Waldo one.
This is the Deadpool hat/balaclava I made for Ruth’s sister. The base is knit in red following the Jackyll & Hide pattern, and I hand sewed on black shapes to outline the eyes, and then put white netting underneath so that it could be used as a mask.
I made this hat for a knitting trade with my friend Katie. We wanted to do a trade of ‘ugly hats’. I worked with both colors at the same time from opposite sides of the hat to create a striped pattern that spirals to the top, where I made the biggest pom-pom I could.
This zig-zag scarf was made for my friend Nicole’s birthday.
I decided on each row’s color by flipping a coin for each row, resulting in a lovely, truly random pattern.
That’s right, it’s an R2D2 hat! I made this to celebrate the new Star Wars movie, and used the Star Wars Droid Beanies pattern. I modified the hat a little bit by adding two extra rows, one where the hat is solid grey, and one at the bottom.
Yes! Another Star Wars hat! This one is BB-8, a character from Star Wars: The Force Awakens. I used a BB-8 Droid Hat Pattern, and modified the circles to be smaller, and looking at the robot in order to judge where to put them.