For the last day of MCM London, I partnered up with my friend Ruth to cosplay Panty and Stocking from the anime Panty and Stocking with Garterbelt. Both of us made our own costumes.
I sewed my skirt, my shirt, my corset, my sleeves, and my leg warmers from white cotton, purple cotton, and a stretchy metallic fabric. The bracelets I painted with silver paint, and the shoes were originally white, which I covered with silver metallic fabric. Ruth patterned the wings, but we both made our own set out of wire, fabric, feathers, and hot glue.
The metallic fabric was such a pain to use because it was very stretchy and pins would leave permanent holes in it. The corset was particularly difficult because the metallic fabric had to be backed onto a stiff muslin. Hopefully I’ll be able to write a more in depth post about how I made the corset despite neglecting to take photos of the whole second half of the process.
Luckily, that Sunday was the coolest of the days, meaning the costume wasn’t too warm to wear. I did have an issue with the shoes, but that was mostly due to my own poor use of glue. Bits of hardened hot glue jabbed into my heel, and the fabric slowly peeled off the shoes. If I were to cover shoes with fabric again, I’d probably do it over the course of a few days using some kind of super glue, or maybe modge podge.
We also met a couple of lovely cosplayers who were cosplaying the same characters as us! I only have a link for the Panty cosplayer’s Instagram, but she has some super cute cosplays on there, so definitely check out her page! I especially loved what they used for the hearts on their outfits!
Photos taken by Daisy Tweed
Last weekend was London MCM 2017! I went all three days and had a fantastic time. I didn’t cosplay the first day, but I wore my french fry dress and got a surprising amount of complements as well as a photo request! If I am able to track down the photo, I’ll be sure to share it here!
On the second day of MCM, I dressed as the fourth regeneration of the Doctor from Doctor Who.
Most of the outfit is store bought, but I made both the scarf and the skirt. I knitted the scarf in fifty hours over the course of 5 months, starting on the first of January and finishing just last week on the 6th. My research for the scarf design was a combination of this site and meticulous combing through yarn websites. The scarf is a replica of the scarf worn by Tom Baker in the first half of season 12 of Doctor Who. I think I was able to find a very good color match with the yarn. It took a bit longer to make than I thought it would, and I made a few tiny mistakes, but I am very happy with it. I made it using US size 8 knitting needles.
The skirt is actually one I made for my costume course at uni. It’s an Edwardian skirt with center back snaps and hook and eyes. I did a very good job of pattern matching each seam, which is especially evident in the back panel. The synthetic plaid fabric is backed on a black cotton, and every seam is piped with the same black cotton.
From left to right: 1 (Lee), 2, 3 (Lucas Hayes), 4 (me!), 5, 7, 8 (Reuben Roper), 9 (Dominic Murphy), 10 (James Sutton), 11 (Jamie Eve), 12 (Joshua Thunig)
I met many lovely people at the Doctor Who meet up, but unfortunately I didn’t take many pictures. I’m not really sure who took the above photo or who some of the people are in it, so please tell me if you know!
If I end up going to LFCC this year, I’ll be wearing this cosplay on one of the days. I plan on adding a waistcoat and possibly some nice shoes to the costume before then.
I started working on this sweater exactly two weeks ago, and I’m really proud of how much I’ve made so far, even if I’m not finished. Eventually, the sweater should be a replica of the Hamburger and Fries sweater that Mabel Pines wears in the television show Gravity Falls.
I used the Laura Sweater pattern and also drew inspiration from this version of the sweater. (The second link is only visible to those with a Ravelry account.) I made the collar 9″ instead of 12″. I added six rows to the raglan part of the sweater in order to make the armholes fit my arms better.
In the pattern, the body of the sweater is 12″ long before the bottom ribbing is worked, but I made mine about 16″ long.
I’m only about halfway done with one sleeve and it’s a little tight, but still wearable. If I were to make this sweater again, I would modify it so that the sleeves would start out wider. The torso of the sweater fits perfectly, except for the very bottom edge where I cast off. I used the slip slip knit method, thinking that it would be super stretchy, but it is not. I might go back and redo my cast off row if I can find a stretchier cast off.
If anyone has any super stretchy cast off methods, please share them with me!
Why yes, that is a Kylo Ren mask! I made this combination hood and scarf using this scoodie pattern. From my calculations, I thought the scoodie would take about two balls of yarn to make, but it ended up taking six.
It’s difficult to photograph without it looking faded or without all of the detail disappearing, but I hope these photos give an idea of what it looks like. The pattern was a video pattern, which I personally do not like as much as a written pattern, but the scoodie was very easy to make. I would definitely suggest this pattern to people learning to crochet, because of its simple design with great visuals in the instructional video. It worked up very quickly because of the thickness of the yarn, and the scoodie is very warm – perfect for cold days!
I made this hat for my friend Nicole, who told me to make her a hat that “has a random word on it that you think describes me”. Of course I went with ‘★ANGLE★’, a reference to my friend being an angel, and to an image that went around ages ago that said “I can be your devil or angle” on it. All of the pictures of the hat (with Nicole in it) were taken by Nicole. I tried to use a couple websites I found through google that translate images to knitting patterns, but I found it difficult to get the patterns to look how i wanted it to. Instead, I printed out a knitting pattern template, which is basically a grid of rectangles roughly the same size and shape of stitches, and drew out the letters and stars on that. The knitting method I used for the lettering is called stranded knitting technique, and involves ‘floats’ of yarn to be left on the back of the work. My tension for these floats were off in the space behind the stars, which resulted in them puffing out quite a bit. My tension in the lettering, however, is much better, and that section is very flat. I think I just need more practice in order to fix my tension issues. Overall, I do like the hat a lot, and I think it’s perfect for Nicole.
Here we see my sister modeling a skirt I made for my friend Genny’s birthday. It’s a reversible knit skirt with an elastic waistband. It’s based off of the character Dirk Strider from the webcomic Homestuck. I put an applique of Dirk’s glasses on the orange side and and one of his hat on the black side. Genny is planning to cosplay as Dirk later on in the year, and hopefully she’ll allow me to post a picture of her complete costume on my site!
The applique on this skirt was difficult to attach because the threads wouldn’t catch during the stitching, and I’d take the skirt off the machine to find terrible seams. The issue might have been that I was trying to applique a knit to another knit. However, I was able to fix the applique in time for my friend’s birthday, and I am very pleased with the result!