Wilf’s Hat from The End of Time

After knitting two of Nardole’s hats, I felt as though I needed more hats. Why? I don’t know, I can’t possibly find the time to wear them all if I keep making them at this speed! This hat is Wilf’s hat from the Doctor Who episode The End of Time. I remember when I first watched the episode I noticed the hat, but I didn’t think I’d end up making it because it looked so complex.

putting on wilf's hatFast forward to a few months later, and I’ve knitted up the hat! I found a this lovely pattern by Patricia Schönhold on Ravelry. It was my first time knitting from a chart, as well as my first time knitting bobbles. The pattern was easy to understand, and I had no problems with any of it.

wilf's hat sideI knitted this hat up with Stylecraft Special DK in Lipstick (this might be wrong, I’ve lost the label) with size 8 (5.0 mm) knitting needles. I realize I’ve used Stylecraft in most of my recent projects. That’s because Stylecraft is really easy for me to get and it comes in a huge number of colors.wilf's hat topI did end up changing the pattern just a bit. Near the crown of the head, I added two extra twists in the large cables. Because of this, the number of stitches I had on my needles did not match up with the pattern and I ended up decreasing differently. I don’t remember exactly what I did, but the difference is visible.

wilf's hat front

I’m very happy with Wilf’s hat, and I definitely wouldn’t have been able to make it without the pattern I found. I am glad that Patricia Schönhold put this pattern up, and I would recommend it to anyone else looking to make Wilf’s hat.

Nardole’s Hat from The Doctor Falls

nardole hat side 2

That’s right! I made another one of Nardole’s hats! This one is from last week’s Doctor Who episode, The Doctor Falls. It was super simple to make compared to the last one!

front nardole hat
Even though I’m very happy with how my hat turned out, the pattern I’ve put at the bottom of the post is slightly different from the hat pictured here. This is because the one I made is small (it fits my head, but it might not fit yours), and I mistakenly made my hat a bit too short.

What you’ll need:

  • US size 8 needles (5mm)
  • Double knit or worsted weight yarn

I used Stylecraft Special DK in 1035 Burgundy and 1709 Gold.
side of nardole hatCast on 96 st, k1, p1, all the way around for 9 inches, then work the following rows:

It may help to divide your stitches into 6 equal sections of 16 stitches

Row 1: *p2tog, k1, p1, k1, p1, k1, p1, k1, p1, k1, p1, k1, p1, k2tog tbl, repeat from * (total of 84 stitches)

Row 2: p1, k1, all the way around

Row 3: *k2tog, p1, k1, p1, k1, p1, k1, p1, k1, p1, k1, p2tog tbl, repeat from * (total of 72 stitches)

Row 4: k1, p1, all the way around

Row 5: *p2tog, k1, p1, k1, p1, k1, p1, k1, p1, k2tog tbl, repeat from * (total of 60 stitches)

Row 6: p1, k1, all the way around

Row 7: *k2tog, p1, k1, p1, k1, p1, k1, p2tog tbl, repeat from * (total of 48 stitches)

Row 8: k1, p1, all the way around

Row 9: *p2tog, k1, p1, k1, p1, k2tog tbl, repeat from * (total of 36 stitches)

Row 10: p1, k1, all the way around

Row 11: *k2tog, p1, k1, p2tog tbl, repeat from * (total of 24 stitches)

Row 12: k1, p1, all the way around

Pull the yarn tail through remaining stitches, pull tight, and secure ends.

All that’s left is to add your pom pom on top and you’re done!

Nardole’s Hat from The Eaters of Light

This is my version of the hat that Nardole wears in the Doctor Who episode The Eaters of Light. When this episode aired last week, I immediately knew that I needed to make his hat. It was fairly simple to make, and I’ll share my process so that anyone who wants one can make one too.

nardole's hat pulled over face

This is how you wear a hat, right?

What you’ll need:

  • US size 8 needles (5mm)
  • Double knit or worsted weight yarn
  • Special Stylecraft DK in Lemon Shade 1020
  • Special Stylecraft DK in Dark Brown Shade 1004
  • Special Stylecraft DK in Green 1116
  • Special Stylecraft DK in Camel 1420
  • Special Stylecraft DK in Spice 1711

Cast on 70 stitches in the round in dark brown (must be a multiple of 10)

Rows 1-13: k1, p1 all the way around

Row 14: fold the brim to the inside of the hat attach to previous row with k1, p1

From here on, the every row is purled. (The design is worked on top after completion)

1 row in lemon, 7 rows in spice,
1 row in green, 7 rows in camel,
1 row in lemon, 7 rows in dark brown,
1 row in spice, 7 rows in lemon,
1 row in camel, 7 rows in green,
1 row in dark brown, 7 rows in lemon,
1 row in spice, 7 rows in dark brown.

On the last row, pull a piece of yarn through all of the stitches. Do not gather it yet, it is easier to work in the design beforehand.

inside of nardole's hat

Interior of the unfinished hat

The design on top is made by weaving pieces of yarn that are the same color as the single rows. They are woven around the knit stitch below this row and brought up to the stripe above at varying heights. This is difficult for me to explain, but I hope the pictures are good enough to understand what I mean. After making the design, tighten the yarn you previously pulled through the top row of stitches and secure. Make a large pom pom out of the dark brown yarn and attach it to the top.

If anyone does make this hat, be sure to let me know!

side of nardole's hat ii

Since it’s summer, I doubt I’ll be wearing the hat any time soon. As soon as cold weather hits, though, I’ll be wearing it all the time!

Raspberry Hood

hood side view I made this hood using the Bobble Hood with Tassels pattern.

hood front

It was easy and straightforward to make,but I did have a little trouble with the borders. I somehow messed up the back post single crochet so that it was on the wrong side of the piece, and had to match that when I made the second portion of the edging stitch.

hood full

Looking back at the pattern, my hood appears to be a bit smaller than the original, and the bobbles are in slightly different places. I’m not entirely sure what I did to cause this.

side hood

I am happy with the hood I ended up with, but I’m not sure it was the one that I was trying to make. I’ve received a lot of compliments on it, and might make another one. Next time I’ll pay closer attention to the pattern to figure out what I did wrong.

Pink Cable Knit

 

I’ve been doing a lot of projects with time restraints and projects for people, and I decided to take a break from that and make something for fun!

tumblr_o500s8X8X71ustsfxo1_1280

I made knit this hat from a pink yarn so bright it looks like it’s glowing. It was super difficult to photograph and I apologize for the grainy photos. I made up the pattern as I went along, and although it isn’t perfect, I can type up a version of the pattern if anyone wants to make this hat. Let me know if you’re interested!

Make sure to check out my facebook page if you haven’t already!

tumblr_o500kbK40e1ustsfxo1_1280

 

Grandpa Vicki

vickis hat

My friend’s friend Vicki asked me to make her a hat that said ‘Grandpa Vicki’ on it. I made this one the same way that I make all of the knitted slouchy beanies, but with the addition of a simple pom-pom. If anyone is interested in the basic ideas behind it, I can make a post about them.

grandpa vicki inside of hat

I designed these letters the same way as I did the ‘ANGEL’ hat, using this knitting graph stitch template. I also used the same method to write the letters, and remembered to take a picture of the inside this time!

If you haven’t liked my facebook page yet, you should! I’ve been writing about the cosplays I did for Bournemouth, and I will be posting about my costumes in detail next week!

All Grown Up Slouched Hat

file_medium2

I made this hat using the All Grown Up Striped Slouched Hat pattern. The pattern calls for the hat to be made using an aran yarn, but I used a double knit (a double knit is thinner than an aran). In order to be able to make the hat to fit my head, I only needed to change the length off the hat. I used a 5.5 mm (I) crochet hook and made the small adult size. I crocheted about 6 more rows in the stripe pattern than the pattern asked for.

The pattern was fairly easy to make, and I learned a new stitch as well as the best method (in my opinion) of making a brim. The pattern calls for the brim to be simultaneously made and attached to the hat, thus eliminating the hassle of sizing the brim to the hat and attaching it. I will definitely be using this brim method for all of my future crochet hats!

Devil or Angle?

tumblr_o351lrkW0Y1ustsfxo3_1280

Why yes, that is a Kylo Ren mask! I made this combination hood and scarf using this scoodie pattern. From my calculations, I thought the scoodie would take about two balls of yarn to make, but it ended up taking six.

It’s difficult to photograph without it looking faded or without all of the detail disappearing, but I hope these photos give an idea of what it looks like. The pattern was a video pattern, which I personally do not like as much as a written pattern, but the scoodie was very easy to make. I would definitely suggest this pattern to people learning to crochet, because of its simple design with great visuals in the instructional video. It worked up very quickly because of the thickness of the yarn, and the scoodie is very warm – perfect for cold days!

12784532_10205579260351768_525346012_nI made this hat for my friend Nicole, who told me to make her a hat that “has a random word on it that you think describes me”. Of course I went with ‘★ANGLE★’, a reference to my friend being an angel, and to an image that went around ages ago that said “I can be your devil or angle” on it. All of the pictures of the hat (with Nicole in it) were taken by Nicole. 12767546_10205579260831780_1235226791_nI tried to use a couple websites I found through google that translate images to knitting patterns, but I found it difficult to get the patterns to look how i wanted it to. Instead, I printed out a knitting pattern template, which is basically a grid of rectangles roughly the same size and shape of stitches, and drew out the letters and stars on that. The knitting method I used for the lettering is called stranded knitting technique, and involves ‘floats’ of yarn to be left on the back of the work. My tension for these floats were off in the space behind the stars, which resulted in them puffing out quite a bit. My tension in the lettering, however, is much better, and that section is very flat. I think I just need more practice in order to fix my tension issues. Overall, I do like the hat a lot, and I think it’s perfect for Nicole.

Hats for Trade

Since my visa doesn’t allow me to do freelance work and I’ve been making hats like it’s what’s keeping me alive, I’ve been trading hats with my friends for different things. I believe I’ve mentioned this before, when I talked about my Ugly Hat Trade with my friend Katie.

My friend Scott, who takes the same course at uni with me, requested that I make him a ‘cat beanie’ in trade for a drawing, so I present you with the Witch’s Cat Hat. The hat is a simple knit base with a half inch of rib stitch at the brim. The ears are two identical crocheted triangles which were then crocheted together using black yarn.

This hat was traded with my friend Luc for food. It was made using the Hella Gay Hat pattern, which I lengthened to make a beanie. I made the larger size, and it ended up being too big. I tried a new technique on this hat, double knitting, which causes the design to be knit on both sides of the piece at the same time, just in opposite colors. It was a little difficult to start out, but easy to pick up. This method takes a lot longer than just creating ‘floats’ in the back of the work, but the tension is much better. Since there is essentially two layers of work, this makes the hat warmer and squisher, which is nice, but since I only double knit a small portion of the hat, it ends up looking a bit odd when placed on the head.

file_medium2 (3)

I am very happy with the pom pom.

Hats!

These are the two hats I knitted for my friend Ruth for Christmas. She asked for a Where’s Waldo Hat, and I messed up the first hat, which is the one on the left. It is clearly not a Where’s Waldo hat, and is instead a Santa hat. I realized my mistake too late, and so finished the Santa hat before moving on to the Where’s Waldo one.


This is the Deadpool hat/balaclava I made for Ruth’s sister. The base is knit in red following the Jackyll & Hide pattern, and I hand sewed on black shapes to outline the eyes, and then put white netting underneath so that it could be used as a mask.

I made this hat for a knitting trade with my friend Katie. We wanted to do a trade of ‘ugly hats’. I worked with both colors at the same time from opposite sides of the hat to create a striped pattern that spirals to the top, where I made the biggest pom-pom I could.

This zig-zag scarf was made for my friend Nicole’s birthday.

I decided on each row’s color by flipping a coin for each row, resulting in a lovely, truly random pattern.

That’s right, it’s an R2D2 hat! I made this to celebrate the new Star Wars movie, and used the Star Wars Droid Beanies pattern. I modified the hat a little bit by adding two extra rows, one where the hat is solid grey, and one at the bottom.

bb8

Yes! Another Star Wars hat! This one is BB-8, a character from Star Wars: The Force Awakens. I used a BB-8 Droid Hat Pattern, and modified the circles to be smaller, and looking at the robot in order to judge where to put them.

santa deadpool