Razor’s Hat from World Enough and Time

I was recently asked to make Razor’s Hat from the Doctor Who episode World Enough and Time. I wrote up a pattern just in case anyone else was interested in making one for themself!

What you’ll need:

  • US size 6 needles (4.0 mm)
  • Double knit yarn

I used Stylecraft Special DK in Dark Brown Shade 1004

I found that if you want to make your hat distressed in a similar way to the show, it is easier to prevent unraveling if you create the distressing as you go. I’ve included two versions of the hat, one with distressing and one without.

The hat sits very different just from folding the brim!

Unfamiliar terms explained:

DSPU: drop stitch and pull out stitches all the way to the brim, pick up a stitch on your left needle, ready to be worked as the next stitch

CO 112 stitches in the round

With Distressing

Row 1-17: (K2, P2) 28 times
Row 18: (K2, P2) 2 times, K2, DSPU, P2, (K2, P2) 25 times [112 st]
Row 19-20: (K2, P2) 28 times
Row 21: K112
Row 22-33: 28 times
Row 34: (K2, P2) 17 times, K2, DSPU, P2 (K2, P2) 10 times [112 st]
Row 35-40: (K2, P2) 28 times
Row 41: (K2, P2) 16 times, K1, DSPU, K1, P2 (K2, P2) 11 times [112 st]
Row 42-47: K112
Row 48: K71, DSPU, K 41 [112 st]
Row 49-51: K112

Without Distressing

Row 1-20: (K2, P2) 28 times
Row 21: K112
Row 22-41: (K2, P2) 28 times
Row 42-51: K112

Both Versions

Row 52-61: P112
Row 62-71: K112
Row 72-81: P112
Row 82-91: K112
Row 92-101: P112
Row 102-111: K112
Row 112-120: P112
Row 121: K2tog [56 st]

After working the last row, pull a piece of yarn through and pull as tight as possible. Weave in your ends and your hat is complete!

13th Doctor Striped Socks

These socks were super fun to make, so I wrote up the pattern and made a video tutorial! Let me know what you think, and be sure to let me know if you make a pair!

Materials:

Special Stylecraft Double Knit in Lapis
Special Stylecraft Double Knit in Duck Egg
3.25 mm Knitting Needles (US3/UK11)

Pattern:

Cast on 60 stitches in Dark Blue
K1P1 all the way around for 8 rows
K all the way around for 8 rows
*Switch to Light Blue, K all the way around for 4 rows
Switch to Dark Blue, K ass the way around for 4 rows
Repeat from * four times, making a total of 5 Dark Blue and 5 Light Blue stripes
Switch to Light Blue, K all the way around for one and a half rows
Shift needles so that you can start the heel from the center back of the work
HEEL & TOE
K 15 stitches, turn
Row 1: sl st, P29, turn
Row 2: sl st, K28, turn
Row 3: sl st, P27, turn
Row 4: sl st, K26, turn
Row 5: sl st, P25, turn
Row 6: sl st, K24, turn
Row 7: sl st, P23, turn
Row 8: sl st, K22, turn
Row 9: sl st, P21, turn
Row 10: sl st, K20, turn
Row 11: sl st, P19, turn
Row 12: sl st, K18, turn
Row 13: sl st, P17, turn
Row 14: sl st, K16, turn
Row 15: sl st, P15, turn
Row 16: sl st, K14, pick up stitch from between previous worked stitch and next stitch on left needle (denoted as m1), k2tog, turn
Row 17: P15, m1, p2tog, turn
Row 18: K16, m1, k2tog, turn
Row 19:  P17, m1, p2tog, turn
Row 20: K18, m1, k2tog, turn
Row 21: P19, m1, p2tog, turn
Row 22: K20, m1, k2tog, turn
Row 23: P21, m1, p2tog, turn
Row 24: K22, m1, k2tog, turn
Row 25: P23, m1, p2tog, turn
Row 26: K24, m1, k2tog, turn
Row 27: P25, m1, p2tog, turn
Row 28: K26, m1, k2tog, turn
Row 29: P27, m1, p2tog, turn
Row 30: K28, m1, k2tog, turn
Row 31: P29, m1, p2tog, turn
HEEL ONLY
Row 32: K 15
Adjust stitches so that you can continue working with your Light Blue yarn where you left off. Complete that row in knit stitch, and then do two more rows of knit stitch in Light Blue.
*Switch to Dark Blue, K all the way around for 4 rows
Switch to Light Blue, P all the way around for 4 rows
Repeat from * until your sock is the right length for your foot.
For reference, I had a total of 5 Dark Blue and 5 Light Blue stripes for my UK size 5 feet.
Refer back to the heel instructions and work the toe the same as the heel.
Complete the sock with kitchener stitch and weave in your ends.

13th Doctor SocksTada! You now have your own pair of 13th Doctor Socks!

Nardole’s Hat from The Doctor Falls

nardole hat side 2

That’s right! I made another one of Nardole’s hats! This one is from last week’s Doctor Who episode, The Doctor Falls. It was super simple to make compared to the last one!

front nardole hat
Even though I’m very happy with how my hat turned out, the pattern I’ve put at the bottom of the post is slightly different from the hat pictured here. This is because the one I made is small (it fits my head, but it might not fit yours), and I mistakenly made my hat a bit too short.

What you’ll need:

  • US size 8 needles (5mm)
  • Double knit or worsted weight yarn

I used Stylecraft Special DK in 1035 Burgundy and 1709 Gold.
side of nardole hatCast on 96 st, k1, p1, all the way around for 9 inches, then work the following rows:

It may help to divide your stitches into 6 equal sections of 16 stitches

Row 1: *p2tog, k1, p1, k1, p1, k1, p1, k1, p1, k1, p1, k1, p1, k2tog tbl, repeat from * (total of 84 stitches)

Row 2: p1, k1, all the way around

Row 3: *k2tog, p1, k1, p1, k1, p1, k1, p1, k1, p1, k1, p2tog tbl, repeat from * (total of 72 stitches)

Row 4: k1, p1, all the way around

Row 5: *p2tog, k1, p1, k1, p1, k1, p1, k1, p1, k2tog tbl, repeat from * (total of 60 stitches)

Row 6: p1, k1, all the way around

Row 7: *k2tog, p1, k1, p1, k1, p1, k1, p2tog tbl, repeat from * (total of 48 stitches)

Row 8: k1, p1, all the way around

Row 9: *p2tog, k1, p1, k1, p1, k2tog tbl, repeat from * (total of 36 stitches)

Row 10: p1, k1, all the way around

Row 11: *k2tog, p1, k1, p2tog tbl, repeat from * (total of 24 stitches)

Row 12: k1, p1, all the way around

Pull the yarn tail through remaining stitches, pull tight, and secure ends.

All that’s left is to add your pom pom on top and you’re done!

Nardole’s Hat from The Eaters of Light

This is my version of the hat that Nardole wears in the Doctor Who episode The Eaters of Light. When this episode aired last week, I immediately knew that I needed to make his hat. It was fairly simple to make, and I’ll share my process so that anyone who wants one can make one too.

nardole's hat pulled over face

This is how you wear a hat, right?

What you’ll need:

  • US size 8 needles (5mm)
  • Double knit or worsted weight yarn
  • Special Stylecraft DK in Lemon Shade 1020
  • Special Stylecraft DK in Dark Brown Shade 1004
  • Special Stylecraft DK in Green 1116
  • Special Stylecraft DK in Camel 1420
  • Special Stylecraft DK in Spice 1711

Cast on 70 stitches in the round in dark brown (must be a multiple of 10)

Rows 1-13: k1, p1 all the way around

Row 14: fold the brim to the inside of the hat attach to previous row with k1, p1

From here on, the every row is purled. (The design is worked on top after completion)

1 row in lemon, 7 rows in spice,
1 row in green, 7 rows in camel,
1 row in lemon, 7 rows in dark brown,
1 row in spice, 7 rows in lemon,
1 row in camel, 7 rows in green,
1 row in dark brown, 7 rows in lemon,
1 row in spice, 7 rows in dark brown.

On the last row, pull a piece of yarn through all of the stitches. Do not gather it yet, it is easier to work in the design beforehand.

inside of nardole's hat

Interior of the unfinished hat

The design on top is made by weaving pieces of yarn that are the same color as the single rows. They are woven around the knit stitch below this row and brought up to the stripe above at varying heights. This is difficult for me to explain, but I hope the pictures are good enough to understand what I mean. After making the design, tighten the yarn you previously pulled through the top row of stitches and secure. Make a large pom pom out of the dark brown yarn and attach it to the top.

If anyone does make this hat, be sure to let me know!

side of nardole's hat ii

Since it’s summer, I doubt I’ll be wearing the hat any time soon. As soon as cold weather hits, though, I’ll be wearing it all the time!

18″ Doll’s Earflap Hat

Image


This is a crochet hat pattern that I designed for my little sister’s American Girl Doll. The hat has two earflaps, and will fit nearly every 18″ doll.

Currently for sale on Ravelry for $0.85!

Stuffed Animal Top Hats!

Image

Labbit wearing Crocheted Top Hat

These top hats are really easy to make and only take a few minutes to crochet. They are sized to fit small stuffed animals.

“Spark” Slouchy Hat

Image

A slouchy hat made with three colors of yarn in double and treble crochet.